HP 2009M/V/F, 1859M, 2309M/V Setting Up the Monitor, Unpacking the Monitor, Installing the Monitor

Page 11

3

Setting Up the Monitor

Unpacking the Monitor

1.Unpack the monitor. Make sure all contents are included. Store the packing box.

2.Turn off the computer and other attached devices.

3.Determine whether the monitor will be desktop mounted or wall-mounted. See “Installing the Monitor” in this chapter.

4.Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation.

5.You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot screwdriver to secure some cables.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near your computer.

Connect the monitor cables after you have installed the monitor.

Preparing the monitor for desktop use

CAUTION: The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing so can cause damage. Unfold the monitor by lifting it from the top edge of the bezel.

1.Set the monitor screen face down on a flat, soft, protected surface.

Unfolding the monitor

2.Grip the base near where it attaches to the monitor with one hand and lift the top part of the monitor until it is unfolded into the desired position.

Image 11
Contents 1859m 2009m/v/f 2159m/v 2309m/v 2709m User’s GuideUSA Notational Conventions Page Contents Index Technical SpecificationsAgency Regulatory Notices HP LCD Monitors Product FeaturesFeatures Page Safety Precautions Safety and Maintenance GuidelinesImportant Safety Information Cleaning the Monitor Maintenance GuidelinesPreparing the monitor for desktop use Setting Up the MonitorInstalling the Monitor Unpacking the MonitorPreparing the monitor for wall-mounting Sliding the base away from the monitor Page To connect the DVI-D cable Connecting the VGA Analog or DVI-D Digital CableTo connect the VGA cable Cable/Adapter Name Description Connecting the Hdmi Cable Select Models OnlyAudio and Video Cables and Adapters Connecting the Audio Cable High-Bandwidth Digital Content Protection HdcpConnecting the power cable Connecting the Power CableCable Management Adjusting the TiltKeyboard Parking Adjusting the SwivelCD Software and Utilities Installing DriversDownloading updated drivers from the Internet Operating the MonitorSelect Open Auto-Adjustment Software Using the Auto-Adjustment FunctionIcon Description Using the On-screen Display OSDFront-Panel Controls Icon Main Menu Submenu Options Description OSD Menu SelectionsHorizontal OSD Position Changes the viewing Main Menu Icon Options Submenu Options DescriptionSet Sleep Time Sets the time you want to place the monitor Identifying Monitor Conditions Selecting Video Input ConnectorsOptimizing Analog Video Adjusting Screen QualityPower-Saver Feature Preparing the Monitor for Shipping Preparing the Monitor for ShippingPage Problem Solution TroubleshootingSolving Common Problems Picture bounces, flickers, or Locating the Rating Label Page Specifications model 1859m Technical SpecificationsModel 2159m/v Specifications model 2009m/v/fModel 2709m Specifications model 2309m/vPreset Video and High-Definition Modes 720 x 15.63 LCD Monitor Quality and Pixel Policy Power Cord Set RequirementsCables Agency Regulatory NoticesFederal Communications Commission Notice ModificationsAvis Canadien Materials DisposalChemical Substances Canadian NoticeKorean Notice Republic of Turkey EEE Regulation EPA Energy Star ComplianceHP Recycling Program #$%&*+ Page VGA Index
Related manuals
Manual 48 pages 21.7 Kb