2Best Practices for Setting Up a MultiSeat Environment
A
NOTE: If the t200 Zero Client drivers are not preinstalled on your host PC, please download them from the HP website. Go to hp.com, click SUPPORT & DRIVERS, click Drivers & Software, type the host PC model number (ms6005 or ms6200) in the field, and click SEARCH to find the latest t200 Zero Client drivers.
USB-connected MultiSeat Environment
This setup is suitable for either t100 series clients or t200 Zero Clients.
NOTE: You cannot mix t100 series clients and t200 Zero Clients connected to the same MultiSeat host PC, but you can mix t100 and t150 client devices.
▲Connect the zero clients to the host PC:
●Connect singleton zero clients (not in a daisy chain) via USB cable directly to the host PC.
●To connect zero clients in a daisy chain, connect each client via USB cable to the next, and then connect one end of the daisy chain via USB cable to the host PC.
NOTE: Up to three zero clients may be connected by USB cable in a daisy chain.
Each zero client in a daisy chain must be powered using the optional power adapter connected to an AC power source or an HP monitor with
Ethernet-connected MultiSeat Environment
This setup is suitable for the t200 Zero Client only.
●Daisy chaining off an
●With no USB connection to supply power, zero clients must have another source of power: either an optional power adapter connected to an AC power source or an HP monitor with
●An Ethernet network infrastructure is required.
◦This should be a 100 Mb or one Gb system.
◦DHCP is highly recommended.
◦Can only see t200 Zero Clients on same subnet as host PC.
5 |