HP 6-1111nr Ultrabook C2K94UARABA manual System board

Remove the fan:

1.Disconnect the fan cable (1).

2.Remove the 2 Phillips PM screws (2) securing the fan to the unit, and then lift the fan upwards

(3).

3.Remove the piece of tape on the underside of the heat sink that secures the fan to the unit (4).

System board

NOTE: The system board spare part kit includes replacement thermal material.

Description	Spare part number
For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN	693228–001
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1. 8GHz processor but not WWAN	693228–501
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.8GHz processor, but not WWAN	693228–601
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN	693229–001
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor, but not WWAN	693229–501
capability (includes replacement thermal material)
For use only with computer models equipped with an Intel 1.7GHz processor (includes replacement	693229–601
thermal material)
For use only with computer models equipped with an Intel 1.4GHz processor (includes replacement	693230–001
thermal material)

48 Chapter 4 Removal and replacement procedures