HP 8200 Paper information, Paper type How to load, Photo tray button is, Push in the Main tray

Chapter 1

Paper information

You can print on photo paper, plain paper, or small media such as index cards and envelopes.

Paper type	How to load
Any supported	1.	Extend the Main tray by
photo or plain		pulling it out with the Main
paper media		tray release or the tray
		grips.
	2.	Slide the paper-width and
		paper-length guides to
		their outermost positions.
	3.	Load paper with the side
		to be printed facing down.
		Check that the stack of
		paper is no higher than
		the top of the paper-
		length guide.
	4.	Adjust the paper-width
		and paper-length guides
		inward until they stop at
		the edges of the paper.
	5.	Push the Main tray all the
		way in.
	6.	Make sure the light on the
		Photo tray button is
		turned off to enable
		printing from the Main tray.

Tray to load

Load the Main tray

Load paper and adjust guides inward

1 Paper-width guide

2 Paper-length guide

Push in the Main tray

1 Push the Main tray all the way in

Photo paper up to	1.	Remove the Output tray.	Load the Photo tray
10 x 15 cm	2.	Adjust the paper-width
(4 x 6 inch) with or		and paper-length guides
without tabs,		outward to make room for
Hagaki cards, A6		the paper.
cards, L-size cards	3.	Load up to 20 sheets of
		paper into the Photo tray
		with the side to be printed
		facing down. If you are
		using tabbed paper, insert
		the paper so the tab feeds
		in last.
	4.	Adjust the paper-width
		and paper-length guides

inward until they stop at the edges of the paper.

10 HP Photosmart 8200 series