HP 9300, XZ837UT manual Installing Memory, DDR3-SDRAM SODIMMs

Page 19

3.Loosen the captive screw (1) and slide the security cover out of the center cavity (2). Figure 2-6Removing the Rear Port Security Cover

Installing Memory

The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3- SDRAM) small outline dual inline memory modules (SODIMMs).

DDR3-SDRAM SODIMMs

For proper system operation, the SODIMMs must be:

●industry-standard 204-pin

●unbuffered non-ECC PC3-10600 DDR3-1333 MHz-compliant

●1.5 volt DDR3-SDRAM SODIMMs

The DDR3-SDRAM SODIMMs must also:

●support CAS latency 9 DDR3 1333 MHz (9-9-9 timing)

●contain the mandatory Joint Electronic Device Engineering Council (JEDEC) specification In addition, the computer supports:

●512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies

●single-sided and double-sided SODIMMs

●SODIMMs constructed with x8 and x16 devices; SODIMMs constructed with x4 SDRAM are not supported

NOTE: The system will not operate properly if you install unsupported SODIMMs.

ENWW	Installing Memory 13

Image 19

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Index Overview Product Features1Front Components Front Components2Side Components Side Components3Rear Components Rear ComponentsRemote Control Features Keyboard Features4Keyboard Features Button Function 5Remote Control FeaturesRemote Control Features Adjusting the Height, Tilt, and Slope Adjusting the SwivelHardware Upgrades Connecting Power 3Closing the Rear Port Access Door Disconnecting PowerRemoving the Rear Port Security Cover Installing the Rear Port Security CoverDDR3-SDRAM SODIMMs Installing Memory1SODIMM Socket Locations Populating Sodimm SocketsInstalling Sodimms Enww 11Removing the Memory Access Panel 13Installing a Memory Module Hardware Upgrades 15Replacing the Memory Access Panel Enww 18Removing the Center Panel Replacing the Hard Drive20Releasing the Drive Access Panel Hardware Upgrades 22Loosening the Hard Drive Cage Screw 24Removing the Hard Drive from the Cage Hardware Upgrades 26Installing the Hard Drive Cage 28Replacing the Drive Access Panel Hardware Upgrades 30Replacing the Access Panel Screw Cover Plate Installing a Security Lock 2Mounting Specifications Synchronizing the Optional Wireless Keyboard or MouseAttaching the Computer to a Mounting Fixture Enww Connecting the Computer to a Cable TV Source Enww Connecting a Second Display Enww Additional Information Grounding Methods Preventing Electrostatic DamageComputer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsIndex