HP 6715B manual Standard Memory, Optional Memory, Memory Upgrades

QuickSpecs

HP Compaq 6715b Notebook PC

Memory

Support for up to 4096 MB of 667-MHz DDR2 SDRAM

Two DIMM slots

DIMM sizes supported: 512 MB, 1024 MB, and 2048 MB

Standard Memory	512 MB (512 MB x 1)
	1024 MB (1024 MB x 1 or 512 MB x 2)
	2048 MB (2048 MB x 1 or 1024 MB x 2)
	4096 MB (2048 MB x 2)
Optional Memory	Support for up to 4096 MB of memory is available (with the installation of optional DDR2 SDRAM
Upgrades	memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software Guide
	for installation procedures. Maximized dual-channel performance requires SODIMMs of the same size
	and speed in both memory slots.
Up to		Slot 1	Slot 2
1024 MB		1024 MB	Empty
1024 MB		512 MB	512 MB
1536 MB		1024 MB	512 MB
2048 MB		1024 MB	1024 MB
4096 MB		2048 MB	2048 MB
	NOTE: This chart does not represent all possible memory configurations. Due to the non-industry
	standard nature of some third-party memory modules, we strongly recommend using only HP branded
	memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower
	memory speed. Full availability of 4 GB of memory requires Windows Vista Business 64-bit or Linux.
	With Windows 32-bit operating systems, the amount of usable memory is dependent upon your
	configuration, so that above 3 GB all memory may not be available due to system resource
	requirements.
Memory Upgrades	HP 512-MB (DDR2 667 MHz) SODIMM		EM993AA
	HP 1024-MB (DDR2 667 MHz) SODIMM		EM994AA
	HP 2048-MB (DDR2 667 MHz) SODIMM		EM995AA

DA - 12686 North America — Version 17 — March 7, 2008 Page 18