HP hw6500 Cingular manual Power Buttons, Settings Buttons

Power Buttons

The two Power buttons display:

•Gray background with an x when they are powered off.

•Amber background when they are powered on and signals are available, but not connected.

•Green background when they are powered on and connected or associated with another HP iPAQ.

NOTE: If a button does not immediately respond when tapped, it may be busy performing a task you requested.

The All Off button displays:

•	Gray background with the x	when all wireless
	features are powered off.

•Green background when one or more wireless features are powered on.

Settings Buttons

The Settings buttons—Phone Settings, Bluetooth Settings, and Bluetooth Manager— only function when the Power buttons are enabled. With the Power button turned on, press the Settings button to open a page with information about configuration and settings for that particular wireless feature.

NOTE: You cannot access these configuration pages if you press the Settings buttons while in a disabled state.

Phone Settings Button

First, tap the Phone Power button to power it on; then press the Settings button to open the configuration screen.

NOTE: For information on configuring the Phone settings, refer to Chapter 5, ”Using the Phone Features”, and Chapter 7, ”Making Data Connections.”

Bluetooth Settings and Manager Buttons

First press the Bluetooth Power button to power it on; then press either the Settings or Manager button to open the Bluetooth settings and configuration screens.

NOTE: For information on configuring Bluetooth settings or manager, refer to Chapter 9, ”Using Bluetooth.”

Managing Multiple Wireless Connections 6–2