HP TippingPoint Next Generation Firewall manual NGFWrunning-ethernet1ipaddress

NGFW{running-ethernet1}ip

Configure IP settings.

Syntax ip igmp

ip igmp version (123)

ip ospf area (A.B.C.D(0-4294967295))

ip ospf authentication mode md5 (1-255) KEY ip ospf authentication mode text KEY

ip ospf cost (1-65535)

ip ospf dead-interval (1-65535)

ip ospf hello-interval (1-65535) [A.B.C.D] ip ospf priority (0-255)

ip ospf retransmit-interval (3-65535) ip ospf transmit-delay (1-65535)

ip pim-sm ip rip

ip rip authentication mode md5 (0-2147483647) KEY ip rip authentication mode text

ip rip receive version VERSION (v1-onlyv2-onlyv1-or-v2) ip rip send version VERSION

ip rip split-horizon [poison-reverse]

Example

NGFW{running-ethernet1}ip igmp version 3 NGFW{running-ethernet1}ip ospf area 1 NGFW{running-ethernet1}ip ospf authentication mode md5 1 mysecret NGFW{running-ethernet1}ip ospf authentication mode text mysecret NGFW{running-ethernet1}ip ospf cost 1 NGFW{running-ethernet1}ip ospf dead-interval 1 NGFW{running-ethernet1}ip ospf hello-interval 1 NGFW{running-ethernet1}ip ospf priority 1 NGFW{running-ethernet1}ip ospf retransmit-interval 3 NGFW{running-ethernet1}ip ospf transmit-delay 1 NGFW{running-ethernet1}ip rip authentication mode md5 1 mysecret NGFW{running-ethernet1}ip rip authentication mode text

Enter key: up to 16 characters:****** NGFW{running-ethernet1}ip rip receive version v2-only NGFW{running-ethernet1}ip rip send version v2-only NGFW{running-ethernet1}ip rip split-horizon poison-reverse NGFW{running-ethernet1}ip ?

NGFW{running-ethernet1}ipaddress

Configure IP address.

Syntax

ipaddress (A.B.C.D/MX:X::X:X/M) [primary] ipaddress dhcpv4

Example

NGFW{running-ethernet1}ipaddress 100:0:0:0:0:0:0:1/64 primary NGFW{running-ethernet1}ipaddress 192.168.1.1/24 NGFW{running-ethernet1}ipaddress dhcpv4 NGFW{running-ethernet1-dhcpv4}?

Valid entries at this position are:

	client	Configure client parameters
	defaultroute-request	Ask for IPv4 default route or not
138	Edit Running Configuration Commands