Return to Device management functions.
3.Adding a device
From the navigation tree of the system management component, select Device List under Device Management. The device management page appears, as shown in Figure 3. Then, click Add to add a device, as shown in Figure 4 and Table 4.
Figure 4 Add a device
Table 4 Device configuration items
Item | Description | |
| Required | |
Host Name/IP | Type the name or IP address of the device to uniquely identify the device | |
| in the system. | |
|
| |
| Required | |
Device Label | Type a label for the device, which can be used as an alias of the device. | |
| The device label can comprise up to 20 characters. | |
|
| |
Device Group | Select a device group for the device. By default, the device group named | |
default is selected. | ||
| ||
|
| |
Time Calibration | Required | |
Select a time mode for the device. | ||
| ||
|
| |
Select access template | Required. Select either of them. | |
If you select Select access template, select a template from the following | ||
Specify access parameters | ||
| ||
|
| |
| 6 |