| If you select Specify access parameters, specify the access parameters, | |
| including Web Username, Web Password, Web Port, Telnet Username, | |
| Telnet Password, SNMP Version, Community String for Reading, and | |
| Community String for Writing. | |
|
| |
| Required | |
Web Username | Specify the username for managing the device through web. | |
| The username can comprise up to 20 characters. | |
|
| |
| Required | |
Web Password | Specify the password for managing the device through web. | |
The strength of the password must meet the password strength | ||
| ||
| requirements of the device. | |
|
| |
| Optional | |
Web Port | Specify the port of the device to be connected with the network. | |
| The port number must be an integer in the range from 0 to 65535. | |
|
| |
| Optional | |
Telnet Username | Specify the username for telneting to the device. | |
| The username can comprise up to 20 characters. | |
|
| |
| Optional | |
| Specify the password for telneting to the device. | |
Telnet Password | IMPORTANT: | |
| ||
| The strength of the password must meet the password strength requirements | |
| of the device. | |
SNMP Version | Required | |
Select an SNMP version, which can be SNMPv1, SNMPv2, or SNMPv3. | ||
| ||
|
| |
| Required | |
Community String for Reading | Specify the SNMP read community string to be used for communication | |
with the device. | ||
| ||
| The string can comprise up to 20 characters. | |
|
| |
| Required | |
Community String for Writing | Specify the SNMP write community string to be used for communication | |
with the device. | ||
| ||
| The string can comprise up to 20 characters. | |
|
| |
| Required for SNMPv3 | |
Authentication Username | Specify the authentication username to be used for communication with | |
| the device. | |
|
| |
| Required for SNMPv3 | |
Authentication Protocol | Specify the authentication protocol to be used for communication with the | |
| device. | |
|
|
7