HP Firewall manual Take effective measures to protect the power system from

Page 13

Item			Requirements	Result
			• Take effective measures to protect the power system from
			the power grid system.
			• Separate the protection ground of the firewall from the
	EMI prevention		grounding device or lightning protection grounding
	EMI prevention		device as far as possible.
			device as far as possible.
			• Keep the firewall far away from radio stations, radar
			and high-frequency devices working in high current.
			• Use electromagnetic shielding when necessary.

	Lightning		• The grounding cable of the chassis is well grounded.
	Lightning		• The grounding terminal of the AC power receptacle is
	protection		• The grounding terminal of the AC power receptacle is
	protection		well grounded.
			well grounded.

			• Equip an uninterruptible power supply (UPS).
	Electricity safety		• In case of emergency during operation, switch off the
			external power switch.

			• The rack is sturdy enough to support the weight of the
	Rack-mounting		firewall and installation accessories.
	Rack-mounting		• The size of the cabinet is appropriate for the firewall.
	requirements		• The size of the cabinet is appropriate for the firewall.
	requirements		• The front and rear of the cabinet are at least 0.8 m
			• The front and rear of the cabinet are at least 0.8 m
			(31.50 in) away from walls or other devices.

Safety	•	The firewall is far away from any moist area and heat source.
precautions	•	The emergency power switch in the equipment room is located.

Tools	• Installation accessories supplied with the firewall
Tools	•	User supplied tools
	•	User supplied tools

Reference	• Documents shipped with the firewall
Reference	•	Online documents
	•	Online documents

9

Image 13

Contents HP A-F1000-A-EI/A-F1000-S-EI VPN Firewall Page Contents Page Front panel view Product overviewRear panel view This chapter includes these sectionsOperation Reference Description of the Open Book markSafety recommendations Preparing for installationSafety symbols General safety recommendationsSafety with laser Examining the installation siteTemperature and humidity Altitude CleannessCooling system Use an ESD-preventive wrist strap ESD preventionLightning protection Installation toolsRack-mounting Checklist before installation Accessories supplied by the firewallRequirements Result Take effective measures to protect the power system from Installation flow Installing the firewallInstalling the firewall in a 19-inch rack Install cage nuts Fix the firewall to the rack Grounding the firewallConnect the grounding cable Installing an interface moduleConnecting a copper Ethernet cable Connecting Ethernet cablesConnecting an optical fiber Install the transceiver module Installing a power supply Installing the power supply and connecting the power cordConnecting an AC power cord Connect an AC power cord Connecting the DC power cableLogging in to the firewall through the console port Logging in to the firewall and configuring basic settingsConnection description of the HyperTerminal Setting terminal parametersSet the serial port used by the HyperTerminal connection Checking before power-on Powering on the firewallChecking after power-on Logging to the firewall through a web browser Logging in to the firewall through TelnetLaunching the basic configuration wizard Performing basic settings for the firewallBasic configuration wizard 1/6 Configuring the system name and user passwordBasic information configuration items Configuring service managementDescription Configuring the IP address for an interface ItemDescription Configuring NATIP/Wildcard Basic configuration wizard 6/6 Completing the configuration wizardDisplaying detailed information about the firewall Hardware management and maintenanceDisplaying the electrical label information of the firewall Displaying the CPU usage of the firewall Displaying the operational status of a power supplyDisplaying the memory usage of the firewall Displaying the operational status of the fansDisplaying operational statistics of the firewall Displaying the temperature information of the firewallField Description Rebooting the firewall Saving the running configuration of the firewallTo reboot a firewall, use one of the following methods Page Power supply system failure TroubleshootingFan failure Password loss Configuration terminal problemsUser password loss No terminal displaySuper password loss Interface module failure Cooling system failureDimensions and weight Appendix a Technical specificationsPower consumption range StoragesPower input specifications Power inputTechnical specifications for the console port Console portTechnical specifications for 1000 Mbps fiber Ethernet ports Technical specifications for fiber Ethernet portsFront panel LEDs Appendix B LEDsStatus Meaning PWR2 OFF Appendix C Interface module Interface specifications of NSQ1XS2U0Description of the LED on the front panel of NSQ1XS2U0 Connecting the interface cable 10A AC power cables used in different countries or regions 10A AC power cables used in different countries or regionsLength Connector outline Power cable outline Countries or regions 16A AC power cables used in different countries or regions 16A AC power cables used in different countries or regionsCountries or regions Page Contacting HP Support and other resourcesRelated information Convention Description ConventionsConvention Description Network topology icons D E F G I L N P R S Index

Related manuals

Manual 119 pages 45.15 Kb

Manual 3 pages 40.21 Kb