Table 13 Output description
Field | Description | |
Power 1 | Number of the power supply | |
|
| |
| The power supply state: | |
Status | • | |
• | ||
| ||
| • | |
|
|
Displaying the temperature information of the firewall
Use the display environment command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
SlotNo | Temperature | Lower limit | Upper limit |
0 | 36 | 0 | 50 |
Field | Description |
System Temperature information (degree centigrade) | System temperature (°C) |
|
|
SlotNO | Number of the slot holding the interface module |
|
|
Temperature | Current temperature |
|
|
Lower limit | Lower threshold |
|
|
Upper limit | Upper threshold |
|
|
Displaying operational statistics of the firewall
When you perform routine maintenance or the system fails, you may need to display the operational information of each functional module for locating failures. Generally, you need to run the display commands one by one. To collect more information one time, you can execute the display
•Save the operational statistics of each functional module of the firewall.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag Diagnostic information is outputting to flash0:/aa.diag.
Please wait...
Save successfully.
Execute the more aa.diag command in user view, and then press the Page Up and Page Down keys to view the contents of the file aa.diag.
33