HP Device manual Inserting a SIM

Page 19

Inserting a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM:

1.Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.

2.Close the display.

3.Disconnect all external devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Turn the computer upside down on a flat surface, with the battery bay toward you.

6.Remove the battery.

7.Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.

8.Replace the battery.

NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.

9.Reconnect external power.

10.Reconnect external devices.

11.Turn on the computer.

Inserting a SIM 13

Image 19

Contents Wireless Select Models Only First Edition June Document Part Number Product notice Iv Product notice Table of contents Page Using wireless devices select models only Icon Name Description Identifying wireless and network status iconsUsing the wireless controls Using the wireless button Using Wireless Assistant software select models only Using operating system controls Using a Wlan Setting up a Wlan Protecting your Wlan Use a wireless transmitter with built-in securitySelect Start Connect to Connecting to a WlanRoaming to another network Using HP Mobile Broadband select models only Inserting a SIM Removing a SIM Using Bluetooth wireless devices select models only Bluetooth and Internet Connection Sharing ICS Troubleshooting wireless connection problems Select Start Computer System properties Cannot connect to a WlanCannot connect to a preferred network Network status icon is not displayed Current network security codes are unavailable Wlan connection is very weak Cannot connect to the wireless router SIM Index