HP Device manual Removing a SIM

Page 20

Removing a SIM

To remove a SIM:

1.Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.

2.Close the display.

3.Disconnect all external devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Turn the computer upside down on a flat surface, with the battery bay toward you.

6.Remove the battery.

7.Press in on the SIM (1), and then remove it from the slot (2).

8.Replace the battery.

9.Reconnect external power.

10.Reconnect external devices.

11.Turn on the computer.

14 Chapter 3 Using HP Mobile Broadband (select models only)

Image 20

Contents Wireless Select Models Only First Edition June Document Part Number Product notice Iv Product notice Table of contents Page Using wireless devices select models only Identifying wireless and network status icons Icon Name DescriptionUsing the wireless controls Using the wireless button Using Wireless Assistant software select models only Using operating system controls Using a Wlan Setting up a Wlan Use a wireless transmitter with built-in security Protecting your WlanConnecting to a Wlan Select Start Connect toRoaming to another network Using HP Mobile Broadband select models only Inserting a SIM Removing a SIM Using Bluetooth wireless devices select models only Bluetooth and Internet Connection Sharing ICS Troubleshooting wireless connection problems Cannot connect to a Wlan Select Start Computer System propertiesCannot connect to a preferred network Network status icon is not displayed Current network security codes are unavailable Wlan connection is very weak Cannot connect to the wireless router Index SIM