Sterling STT40, STT70 manual Maintenance

Page 23

STT40 / STT70

5. Maintenance

￿This chapter is intended for persons having skills in electrical and mechanical areas due to their training, experience and supporting documentation.

Personnel using the instructions in this chapter must be familiar with accident prevention regulations, operating conditions, safety regulations and their implementation.

Ensure in each case that the personnel are informed.

For maintenance work taking place at heights of over 6ft. (1829mm), use only ladders and working platforms or similar equipment intended for this purpose. At greater heights, the proper protective equipment against falling must be worn.

Use only suitable lifting gear in proper working order and load suspension devices within the sufficient carrying capacity. Do not stand or work under suspended loads!

Ensure that electric motors and controller cabinets are sufficiently protected against moisture.

Use suitable workshop equipment.

Before starting maintenance work, appoint a supervisor.

Before beginning maintenance work on the system, inform the responsible personnel.

Never operate the equipment when it is partially dismantled.

Any maintenance and repair work NOT described in this manual may only be carried out by Sterling service personnel or by specialized staff authorized by Sterling.

/To ensure that it cannot be switched on unintentionally, disconnect the equipment from the main power supply before starting maintenance procedures.

Before starting maintenance work, all compressed air pipes on the equipment should be depressurized.

Maintenance 5-1

Page 22 Page 24
Image 23
Page 22 Page 24
Contents STT70 Operation Instructions Dehumidified air dryer STT40STT40 / STT70 STT40 / STT70 Table of contents 10-5 General Information STT40 / STT70 Field of application Explanations and informationLegal basis Safety instructions General Operation AssemblyMaintenance For the safety of the device Start up Initial Operation Switching on the DryerPower signal lamp turns off Continuous Operation Switching the Dryer onFor operation with the optional timer clock Setting the Drying Temperature Autotuning the temperature controller Switching the Dryer off Error and error correction Hopper heater Following errors can cause an alarm BlowerRegeneration heater Maintenance STT40 / STT70 System model # Serial # Every week Maintenance scheduleServicing Process Air Filters Preventative MaintenanceRecommendations for Cleaning and Replacing Filters STT40 / STT70 Cleaning or Replacing the Return Air FilterServicing the Dew Point Monitor Symptoms of Worn Desiccant Corrective MaintenanceRemove Hose Clamps Replacing Worn DesiccantRequired Desiccant Amounts Disposing of Drying AgentsReplacing the Process Heater Remove Clamp Process Heater ProceduresCooling Coil Location Replacing/Cleaning the Cooling CoilsHeating Coil Replacing the regeneration heating coilCleaning the Drying Hopper STT 60 STTFunctional description General Information ➅ ➄ Read the timer clock operating manual Drying Hopper Drying Hopper OptionalHopper Heater Temperature controllerContact information Default Settings for Jumo TEMP. ControllerReturn Air Cooler Optional Connection to a Pneumatic Conveying System OptionalTransporting, Assembly and Storage Transporting and Packing Storage AssemblyAssembly instructions Grounding the equipment Grounding the equipment against electrostatic chargingElectrical Connection STT70 Connection of Return Air Cooler OptionalIntroduction TroubleshootingSTT40 / STT70 Check resin manufacturer’s data Using a Platinum Resistance Thermometer Determining Temperature Controller Errors or Sensor ErrorsUsing a Thermocouple Return Air Cooler optional Technical dataSTT40 STT70Dimension Sheet Spare parts list Pos ID-number Description STT40STT70 Operating unit Pos ID-number Description Control unit STT70 Control unit STT40Electrical manual Accessories Parameter Parameter set Basic temperature controller settings STT40Code Basic temperature controller settings STT70 For STT 40 Dryer Quick Start GuidesPosition O On without timerOn with timer Arrow up Set PointArrow down Process Display LED Status LED Ramp/Program Page Proper Shut-down Guide for STT 40 Dryer Heater Connection Thermocouple Main power High Temp SafetyQuick Start Guide for STT 70 Dryer Exit Page Proper Shut-down Guide for STT 40 Dryer Parts Department

STT40, STT70 specifications

The Sterling STT40 and STT70 are one of the most noteworthy entries in the landscape of compact, high-performance generators, designed to serve a variety of applications in both residential and commercial settings. Built with cutting-edge technology, these models exhibit durability and reliability, ensuring that power needs are met efficiently.

The Sterling STT40 is a robust 40 kW generator that is ideal for small businesses, remote sites, and residential backup power. It features a high-quality diesel engine, providing fuel efficiency along with impressive power output. The generator incorporates a fully automatic transfer switch (ATS), which ensures seamless power transition during outages. With an IP54 rating, it offers excellent protection against dust and water, making it suitable for outdoor use in diverse environments.

In contrast, the Sterling STT70 boasts a greater power output of 70 kW, making it suited for larger commercial applications or industrial uses. Similar to the STT40, the STT70 is equipped with a top-tier diesel engine that delivers optimal performance and longevity. Its heavy-duty construction allows it to operate efficiently under strenuous conditions. The STT70 also features advanced cooling systems and a sound-attenuated enclosure, which minimizes operational noise, making it a perfect choice for noise-sensitive situations.

Both models utilize innovative technologies to enhance user experience and operational efficiency. An intuitive digital control panel simplifies monitoring and management, providing real-time data on voltage, current, and frequency. This allows users to make informed decisions about power usage and maintenance needs. Additionally, remote monitoring capabilities enable owners to oversee generator performance from virtually anywhere, maximizing uptime.

Safety is another key aspect of both generator models. They are equipped with automatic shutdown features that activate in the event of low oil pressure or overheating, minimizing the risk of damage and ensuring safety during operation.

In summary, the Sterling STT40 and STT70 generators stand out in the market due to their reliability, advanced technology, and robust safety features. They are perfect for anyone seeking dependable power solutions, whether for residential, business, or industrial needs. With their combination of power efficiency and durability, they remain top contenders in the generator space.
Top Page Image Contents