Removal and Replacement Procedures
✎Steps 4 through 18 apply to HP Pavilion dv4200 models. See steps 19 through 25 in this section to remove the system board on Compaq Presario V4200 and HP Compaq nx7220 models.
4.Turn the computer top side up with the front toward you.
5.Remove the following screws:
1Three Phillips PM2.5×7.0 screws that secure the system board and shield to the computer
2Two Phillips PM2.0×4.0 screws that secure the system board and shield to the computer
3Two Phillips PM2.0×16.0 screws that secure the system board, shield, and USB board to the computer
4One Phillips PM2.5×7.0 screw that secures the USB board to the computer
Removing the System Board Screws, HP Pavilion dv4200 Models
Maintenance and Service Guide |