HP V4000T, V4201XX, V4200, V4209TU, V4203XX, V4322EA, V4354EA, V4275EA File Menu, Select To Do This

Troubleshooting

4.To confirm the restoration, press f10.

5.Select File > Save changes and exit, and then follow the instructions on the screen.

When the computer restarts, the factory settings are restored, and any identification information you have entered is saved.

Selecting from the File Menu

	Table 2-1
	File Menu
Select	To Do This
System Information	■ View identification information about the
	computer and any battery packs in the system.
	■ View specification information about the
	processor, memory and cache size, video
	revision, keyboard controller version, and
	system ROM.
Save to floppy	Save system configuration settings to a diskette.
Restore to floppy	Restore system configuration settings from a
	diskette.
Restore defaults	Replace configuration settings in Computer Setup
	with factory default settings. (Identification
	information is retained.)
Ignore changes and exit	Cancel changes entered during the current
	session. Then exit and restart the computer.
Save changes and exit	Save changes entered during the current session.
	Then exit and restart the computer. The changes
	you save are in effect when the computer restarts.

Maintenance and Service Guide 2–3