Sterling 882.00295.00 specifications Maintenance Responsibility

Page 10

employer probably has established a set of safety rules in your workplace. Those rules, this manual, or any other safety information will not keep you from being injured while operating your equipment.

Learn and always use safe operation. Cooperate with co-workers to promote safe practices. Immediately report any potentially dangerous situation to your supervisor.

;NEVER place your hands or any part of your body in any dangerous location.

;NEVER operate, service, or adjust the dryer without appropriate training and first reading and understanding this manual.

;NEVER try to pull material out of the dryer with your hands while it is running!

;Before you start the dehumidifying dryer, check the following:

•Remove all tools from the dryer;

•Be sure no objects (tools, nuts, bolts, clamps, bars) are laying in the area;

;If your dryer has been inoperative or unattended, check all settings before starting.

;At the beginning of your shift and after breaks, verify that the controls and other auxiliary equipment are functioning properly.

;Keep all safety guards in place and in good repair. NEVER attempt to bypass, modify, or remove safety guards. Such alteration is not only unsafe, but will void the warranty on your equipment.

;When changing control settings to perform a different mode of operation, be sure selector switches are correctly positioned. Locking selector switches should only be adjusted by authorized personnel and the keys removed after setting.

;Report the following occurrences IMMEDIATELY:

•unsafe operation or condition

•unusual dryer action

•leakage

•improper maintenance

•NEVER stand or sit where you could slip or stumble into the dehumidifying dryer while working on it.

;DO NOT wear loose clothing or jewelry, which can be caught while working on the dryer. In addition, cover or tie back long hair.

;Clean the dehumidifying dryer and surrounding area DAILY, and inspect the machine for loose, missing or broken parts.

;Shut off power to the dryer when it is not in use. Turn the switch to the OFF position, or unplug it from the power source.

Maintenance Responsibility

Proper maintenance is essential to safety. If you are a maintenance worker, you must make safety a priority to effectively repair and maintain equipment.

Before removing, adjusting, or replacing parts on a machine, remember to turn off all electric supplies and all accessory equipment at the machine, and disconnect and lockout electrical and pneumatic power. Attach warning tags to the disconnect switch and air shutoff valve.

Large Dehumidifying Dryers

Safety

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SDA 1000-5100 Series Large Dehumidifying Dryer AP-1 Control Event of Shipping Damage Shipping InfoUnpacking and Inspection If the Shipment is Not CompleteReturns Credit ReturnsTable of Contents Operation Large Dehumidifying Dryers How to Use This Manual SafetySafety Symbols Used in this Manual Dryer Safety Tags Description General Responsibility ResponsibilityOperator Responsibility Maintenance Responsibility Reporting a Safety Defect Models Covered in This Manual Functional DescriptionGeneral Description Process/Regeneration Cycle Sequence of OperationMechanical Features Standard FeaturesAuto Start Timer Electrical FeaturesDewpoint Extend OptionsClosed-Loop Regeneration Drawings and Diagrams Optional dryer dust collector Process Aftercooler Aftercooler Design SpecificationsProcess Air Dust Collector Process Air Dust Collector Recommended Temperature Settings Material Overdrying ProtectionElectrical Options Mechanical OptionsController Options Safety Device Lock-Outs Safety Devices and InterlocksSafety Circuit Standards Fail Safe OperationPage Dimensions and Specifications Denotes availability Mechanical Options Denotes availabilityDenotes availability Rigging and Placing Unit Mechanical InstallationUncrating the Equipment Making Electrical ConnectionsMaking Gas Line Connections Gas-Fired Models Only DescriptionChecking for Proper Blower Rotation Checking Blower RotationMaking Dryer/Drying Hopper Process Air Connections Dryer/Drying Hopper Process Air ConnectionsProcess Air Heater on Drying Hopper Large Dehumidifying Dryers Mechanical Installation Connecting Aftercooler/Precooler Cooling Water Optional Aftercooler Components & Flow RatesUsing the Drying Hopper Air Trap Drying Hopper Air TrapControls Controller DescriptionProcess Air Temperature and Conveying Process Controller Dryer Status Screen Startup ScreenIdentifying Controller Screens Dryer Alarms Help System LOG OFFMain Menu Screen Setting Values Dryer Menu Dryer Status Dryer Setup Over DRY Protect Alarms Auto TuneAuto Start Main Menu Dryer Setup Screen 3 Dryer Setup Screen 2Dryer Setup Screen 4 Overdry Protection Screen 1 Overdry ProtectionOverdry Protection Screen 2 Autotune Alarm History ScreenProcess AutoTune Screen Autostart Timer Screen DEW Point SetupDew Point Setup Screen Auto StartHelp Menu Screen System Setup SET Clock Hour Meters Alarm History StatusHelp Menu System MenuSystem Setup Screen System Backup Service Menu Main Menu System SetupLOW Level Detection Setup Clock Menu Screen Autostart Clock ScreenInput Status Screen Hour Meter ScreenInput Status Output StatusService System Backup ScreenService Menu Screen Alarm Screens Redundant Safety Controller Display Alarm Screen ExampleSetting the Redundant Safety Controller Always put your set point to 30F above set pointLarge Dehumidifying Dryers Controls Operation Start-upUsing the Dryer Status Screen Alarms Alarm DescriptionsShutdown Maintenance Schedule MaintenancePhotocopy this page for your maintenance records Preventative Maintenance Cleaning or Replacing the Process Air FiltersCleaning or Replacing the Regeneration Filter Calibrating the Dirty Filter AlarmChecking the Dewpoint Control System Symptoms of Worn Out Desiccant Corrective MaintenanceReplacing the Desiccant Desiccant Tower Assembly Replacing the Process Heater Electric DryersProcess Heater Box Assembly Replacing the Regeneration Heater Electric DryersRegeneration Heater Box Assembly Basic Troubleshooting TroubleshootingIntroduction Large Dehumidifying Dryers Troubleshooting Using a Thermocouple Determining Temperature Controller Errors or Sensor ErrorsUsing a Platinum Resistance Thermometer Warranty AppendixTechnical Specifications Annex B InformationSpare Parts List Level 3 Mechanical Components Dryer Identification Serial Number Tag Located on back of DryerParts Department Service DepartmentTechnical Assistance Sales Department

882.00295.00 specifications

The Sterling 882.00295.00 is a remarkable piece of engineering that seamlessly combines functionality, durability, and aesthetic appeal in a compact form. Designed for those who require reliability and performance, this model stands out in its category, incorporating advanced technologies and user-friendly features.

One of the primary characteristics of the Sterling 882.00295.00 is its robust construction. The casing is made from high-quality materials that ensure resistance to wear and tear, making it suitable for various environments, whether industrial, commercial, or residential. Its sleek design not only provides visual appeal but also enhances its usability, allowing for easy integration into any workspace or setting.

The Sterling 882.00295.00 is equipped with state-of-the-art technology that enhances its performance. It features a precision-engineered mechanism that guarantees accurate readings and efficient operation. Users can rely on its consistent performance, whether for daily tasks or specialized applications. With enhanced data processing capabilities, this device can quickly analyze and display information, making it a valuable tool for professionals.

Another significant aspect of the Sterling 882.00295.00 is its user-centric design. The interface is intuitively organized, providing a seamless experience when navigating its features. This focus on usability ensures that operators of all skill levels can easily understand and utilize the device effectively. Additionally, the model often includes customizable settings, allowing users to tailor its functionality to meet specific needs.

In terms of connectivity, the Sterling 882.00295.00 supports modern protocols, enabling easy integration with other devices and systems. This feature is vital in today's interconnected world, where data sharing and collaboration are essential. Furthermore, it typically incorporates energy-efficient technologies, aligning with sustainable practices and reducing the overall carbon footprint.

Overall, the Sterling 882.00295.00 stands out for its blend of durability, advanced technology, and user-friendly features. It is a versatile solution that meets the demands of various users, from industrial professionals to everyday operators. With its focus on precision and efficiency, the Sterling 882.00295.00 is a valuable addition to any toolkit, ensuring that tasks are completed with the highest level of accuracy and reliability. Whether used in a high-stakes environment or for everyday applications, this model exemplifies the right combination of innovation and practicality.
Top Page Image Contents