HP M2251AP, M2599XX, M2526TU, M2525TU, M2528TU, M2529TU, M2527TU, M2523TU manual Accessing Computer Setup

Troubleshooting

Accessing Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Tools, and Advanced menus.

1.Open Computer Setup by turning on or restarting the computer. Press f10 while the F10 = Based Setup message is displayed in the lower-left corner of the screen.

❏To change the language, press f2.

❏To view navigation information, press f1.

❏To return to the Computer Setup menu, press esc.

2.Select the File, Security, Tools, or Advanced menu.

3.To exit Computer Setup, choose one of the following:

❏To exit without saving any changes, use the arrow keys to select File > Ignore changes and exit, and then follow the instructions on the screen.

❏To exit and save all the settings you have entered, use the arrow keys to select File > Save changes and exit, and then follow the instructions on the screen.

Your preferences are set when you exit Computer Setup and go into effect when the computer restarts.

Computer Setup Defaults

To return all settings in Computer Setup to the values that were set at the factory:

1.Open Computer Setup by turning on or restarting the computer. Press f10 while the F10 = Based Setup message is displayed in the lower-left corner of the screen.

❏To change the language, press f2.

❏To view navigation information, press f1.

2.Use the arrow keys to select File > Restore defaults.

3.Select the Restore Defaults check box.

2–2 Maintenance and Service Guide