Removal and Replacement Procedures
3.Remove the PM2.0×6.0 screw 1 that secures the optical drive to the computer.
✎The Compaq Presario M2000 optical drive is secured by one PM2.0×7.0 screw.
4.Insert a thin tool, such as a paper clip 2, into the media tray release hole. (The optical drive media tray releases from the optical drive.)
5.Use the media tray frame to slide the optical drive 3 to the right.
6.Remove the optical drive.
Removing the Optical Drive
Reverse the above procedure to install an optical drive.
Maintenance and Service Guide |