HP CQ61z-300, CQ61-313AX, CQ61-312SL Hard drive spare part kit includes a hard drive bracket

Removal and replacement procedures

Hard drive

✎The hard drive spare part kit includes a hard drive bracket.

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

Remove the hard drive:

1.Loosen the four Phillips PM2.5×5.5 captive screws 1 that secure the hard drive cover to the base enclosure.

2.Lift the right side of the cover 2, swing it up and to the left, and then remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 531517-001.