![](/images/new-backgrounds/1153271/15327191x1.webp)
Removal and replacement procedures
3.Disconnect the 2 WLAN antenna cables from the WLAN module.
✎The black WLAN antenna cable 1 is connected to the WLAN module “Main” terminal. The gray WLAN antenna cable 2 is connected to the WLAN module “Aux” terminal.
4.Remove the Phillips PM2.0×3.0 screw 3 that secures the WLAN module to the base enclosure. (The edge of the module opposite the slot rises away from the computer.)
5.Remove the WLAN module 4 by pulling it away from the slot at an angle.
✎WLAN modules are designed with a notch 5 to prevent incorrect insertion into the WLAN module slot.
✎The wireless module compartment accepts both
Reverse this procedure to install the WLAN module.
Maintenance and Service Guide |