![](/images/new-backgrounds/1213414/213414135x1.webp)
Removal and replacement procedures
ÄCAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
5.Remove the 4 Phillips PM2.5×7.0 screws 1 securing the display hinges to the computer.
6.Lift the display panel 2 straight up to remove it.
7.If it is necessary to replace the display bezel or any of the display assembly internal components, remove the following screw covers and screws:
1 Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers are included in the Display Rubber Kit, spare part number
2 Two Phillips PM2.5×7.0 screws on the display bezel bottom edge.
Maintenance and Service Guide |