![](/images/new-backgrounds/1213414/213414159x1.webp)
Removal and replacement procedures
Remove the system board:
1.Disconnect the USB board cable 1 from its mounting clip in the base enclosure.
2.Disconnect the Bluetooth cable 2 from the system board.
3.Disconnect the
4.Disconnect the power connector cable 4 from the system board.
5. Remove the Phillips PM2.5×6.0 screw that secures the system board to the base enclosure.
6.Grasp the right edge 1 of the system board.
7.Lift the system board 2, and pull it away from the base enclosure 3 at an angle.
Reverse this procedure to install the system board.
Maintenance and Service Guide |