Optical drive
Description | Spare part |
| number |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, matte black | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, biscotti | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, silver (for models 1.1, 1.2 and 1.3 only) | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, white (for model 1.1 only) | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, charcoal (for models 1.2 and 1.3 only) | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, imperial blue (for models 1.2 and 1.3 only) | |
|
|
DVD±RW SuperMulti DL Drive with LightScribe, velvet red (for models 1.2 and 1.3 only) | |
|
|
|
|
|
|
and 1.3 only) |
|
|
|
|
|
1.3 only) |
|
|
|
and 1.3 only) |
|
|
|
and 1.3 only) |
|
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 52).
Remove the optical drive:
1.Position the computer upside down with the front toward you.
2.Remove the Phillips PM2.5x5.0 screw (1) that secures the optical drive to the computer.
3.Insert a
56 Chapter 4 Removal and replacement procedures | ENWW |