Description | Spare part |
| number |
|
|
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS ready) | |
(for models 1.2 and 1.3 only) |
|
|
|
Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter (for model 1.3 only) | |
|
|
Before removing the WLAN module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 52).
5.Remove the hard drive cover (see Hard drive on page 53).
Remove the WLAN module:
1.Turn the computer upside down with the front toward you.
2.Loosen the 2 Phillips PM2.5×5.0 captive screws (1) that secure the
3.Lift the cover off the computer (2). The
4.Disconnect the two WLAN antenna cables (1) from the WLAN module.
5.Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.)
ENWW | Component replacement procedures 59 |