![](/images/new-backgrounds/1213403/213403133x1.webp)
Removal and replacement procedures
Display assembly
✎The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, webcam (select models only), microphone, nameplate, and logo.
Description | Spare part number |
|
|
graphics subsystems |
|
|
|
subsystems |
|
|
|
graphics subsystems |
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page
6.Remove the following components:
a.Hard drive cover (see “Hard drive” on page
b.Mini Card compartment cover (see “RTC battery” on page
c.Optical drive (see “Optical drive” on page
d.Keyboard (see “Keyboard” on page
e.Keyboard cover (see “Keyboard cover” on page
f.Speaker assembly (see “Speaker assembly” on page
Maintenance and Service Guide |