![](/images/new-backgrounds/1213403/213403159x1.webp)
Removal and replacement procedures
Remove the modem module:
1.Turn the computer
2.Remove the two Phillips PM2.0×4.0 screws 1 that secure the modem module to the system board.
3.Disconnect the modem module cable 2 from the modem module.
4.Lift up on the front of the modem module 3 to disconnect it from the system board.
Reverse this procedure to install the modem module.
✎When replacing the modem module, be sure that the connector on the bottom of the modem module connects firmly to the system board.
Maintenance and Service Guide |