HP CQ41-217TU, CQ41-205TX, CQ41-204TX, CQ41-207TX, CQ41-224TX, CQ41-223TX, CQ41-213TU Optical drive

Removal and replacement procedures

Optical drive

✎The optical drive spare part kit includes an optical drive bezel and bracket.

Description	Spare part number
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe	578406-001
DVD±R/RW SuperMulti DL Drive with LightScribe	482178-001

Before removing the optical drive:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

Remove the optical drive:

1.Position the computer with the right side toward you.

2.Remove the Phillips PM2.5×5.0 screw 1 that secures the optical drive to the computer.

3.Insert a thin tool, such as a paper clip 2, into the release access and press to release the drive. (The optical drive disc tray is partially ejected from the optical drive.)

4.Use the disc tray frame to slide the optical drive 3 out of the computer.

Reverse this procedure to reassemble and install an optical drive.

4–20 Maintenance and Service Guide