Removal and replacement procedures
10.Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge of the display bezel 3 until the bezel disengages from the display enclosure.
11.Remove the display bezel 4. The display bezel without a webcam module is available using spare part number
12.To replace the display inverter, lift the inverter 1 from the clips in the display enclosure as far as the display panel cable and the backlight cable will allow.
13.Disconnect the display panel cable 2 and the backlight cable 3 from the display inverter. The display inverter is available using spare part number
Maintenance and Service Guide |