Installing Norton Internet Security | HP 2840TC instruction

Installing Norton Internet Security™

1.Insert the Norton Internet Security CD into the CD-RW, DVD-ROM or CD-ROM drive and complete the following steps to install the Norton Internet Security software.

Note: If AutoRun is enabled on your system, the Norton Internet Security Installation window will be displayed automatically and you can skip steps 2 and 3.

2.From the Start menu, select RUN.

3.Type E:\cdstart (substitute “E” for the appropriate drive letter of your CD-RW, CD-ROM or DVD-ROM drive).

4.From the Norton Installation window, select Install Norton Internet Security and the desired language.

5.Follow the installation instructions that are displayed on the screen.

6.When the installation is complete, click Finish.

7.Remove CD from drive.

8.Restart your computer when prompted, so that the changes will take effect.

Important: Norton Anti-Virus must be installed from the Norton Internet Security CD. Installing Norton Anti-Virus from CD will also install the Norton Internet Security firewall. If you don’t require the firewall feature, you must remove it via the Windows Control Panel under Add/Remove software. Select the application “Norton Internet Security” application to remove the firewall. A firewall provides protection for constant connections such as DSL or cable modems.