HP 110c-1040DX, 110c-1048NR, 110c-1001NR manual

Page 70

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module.

a.Align the notched edge (1) of the memory module with the tab in the memory module slot.

b.With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.

c.Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place.

CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module.

11.Align the tabs on the memory module compartment cover with the notches on the device, and then close the cover (1).

12.Tighten the 2 cover screws (2).

13.Replace the battery.

62 Chapter 10 Memory modules

Image 70

Contents Mini User Guide Product notice Safety warning notice Iv Safety warning notice Table of contents Internet Digital cards Drives Top components Knowing the partsIdentifying the hardware TouchPadLight Right TouchPad buttonFront components KeysStart Control Panel Performance Right-side components Left-side componentsDisplay components Bottom components Wireless antennas Identifying the labels Additional hardware componentsPage Using power-saving states Power managementSetting power options Initiating and exiting StandbyInitiating and exiting Hibernation Using power schemesViewing the current scheme Selecting a different power scheme Using external AC powerSetting password protection upon exiting Standby Customizing power schemesUsing battery power Connecting the AC adapterDisplaying the remaining battery charge Inserting or removing the batteryCharging a battery Managing low battery levels Maximizing battery discharge timeIdentifying low battery levels Page Resolving a low battery level Calibrating a batteryFully charge the battery Disable Hibernation and Standby Discharge the batteryFully recharge the battery Conserving battery powerStoring a battery Reenable Hibernation and StandbyDisposing of a used battery Shutting down the deviceInternet Connecting to a wired network Using wireless devices Connecting to a wireless networkIdentifying wireless and network status icons Using the wireless switch Using the wireless controlsUsing HP Connection Manager software select models only Using a Wlan Using HP Wireless Assistant softwareSetting up a Wlan Protecting your WlanConnecting to a Wlan Use a wireless transmitter with built-in securityRoaming to another network Using HP Mobile Broadband select models only Inserting a SIMRemoving a SIM Page Page Multimedia Multimedia featuresIdentifying your multimedia components Multimedia Adjusting the volume Installing multimedia software from the Internet Using other preinstalled multimedia softwareMultimedia software Audio Connecting external audio devicesChecking your audio functions Page Connecting an external monitor or projector VideoWebcam Security Using passwordsProtecting the device Passwords set in Windows Passwords set in Setup UtilityAdministrator password Power-on passwordManaging a power-on password Using antivirus software Using firewall software Installing critical updates Digital cards Inserting a digital cardStopping and removing a digital card Connecting a USB device Using a USB deviceUSB devices Stopping and removing a USB device Using the keyboard Setting pointing device preferencesUsing pointing devices Pointing devices and keyboardInitiating Standby fn+f1 Function HotkeyIncreasing screen brightness fn+f4 Switching the screen image fn+f2Decreasing screen brightness fn+f3 Initiating QuickLock fn+f6Decreasing speaker sound fn+f10 Muting speaker sound fn+f8Increasing speaker sound fn+f11 Drives Identifying installed drivesHandling drives Using external drives Using optional external devicesMemory modules Page Page Page Updating software Determining the Bios version Updating the BiosDownloading a Bios update Page Updating programs and drivers Using the Setup Utility Setup UtilityStarting the Setup Utility Changing the language of the Setup UtilityExiting the Setup Utility Restoring default settings in the Setup UtilityDisplaying system information Main menu Setup Utility menusSystem Configuration menu Security menuDiagnostics menu Index VGAJacks SIM

Related manuals

Manual 132 pages 21.84 Kb

Manual 8 pages 26.72 Kb