HP 110c-1048NR manual Setup Utility menus, Main menu, Security menu, System Configuration menu

Setup Utility menus

The menu tables in this section provide an overview of Setup Utility options.

NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your device.

Main menu

Select	To do this
System information	● View and change the system time and date.
	●	View identification information about the device.
	●	View specification information about the processor, memory size,
		and system BIOS.

Security menu

Select	To do this
Administrator password	Enter, change, or delete an administrator password.
Power-On Password	Enter, change, or delete a power-on password.

System Configuration menu

Select	To do this
Language Support	Change the Setup Utility language.
Processor C4 State	Enable/disable the processor C4 sleep state.
Boot Options	Set the following boot options:
	● f10 and f12 Delay (sec.)―Set the delay for the f10 and f12 functions
	of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
	● Internal Network Adapter boot―Enable/disable boot from Internal
	Network Adapter.
	● Boot Order―Set the boot order for:
	◦	Internal hard drive (select models only)
	◦	USB Floppy
	◦	USB CD/DVD ROM Drive
	◦	USB flash drive
	◦	USB Hard drive
	◦	USB Card Reader
	◦	Network adapter
		NOTE: Only the devices attached to the system will appear
		in the boot order menu.

70 Chapter 12 Setup Utility