HP n400c manual Hardware Guide

Page 95

Computer Upgrades and Add-ons

11.To add a new modem/NIC board, align the keyed end of the board with the keyed area of the modem slot. Carefully insert the board into the modem slot 1 at a 45-degree angle and press down on the board 2. When properly seated, the retainer latches snap into place.

✎The board connectors are keyed (notched) to ensure correct positioning.

12.Plug the internal modem-to-RJ11 cable 3 (located inside the computer) into the connector on the modem/NIC board.

13.Replace the palm rest and reinstall the screws.

14.Connect the modem or network cable to the appropriate jack on the computer and to the wall. Refer to “Connecting a Modem or NIC” in Chapter 7.

Hardware Guide

8–15

Image 95

Contents Hardware Guide Hardware Guide First Edition April Part Number Contents Battery Packs External Device Connections Specifications Setting up the Hardware Hardware and Software SetupHardware and Software Setup Hardware Guide Hardware and Software Setup Hardware Guide Read the following guidelines, then set up the software Setting Up the SoftwareAfter Software Setup Hardware and Software Setup Front Panel Components Look at the ComputerFront Panel Components Top Components Top ComponentsLight, Button, or Component Function Top Components Top Components Right Side Components Right Side ComponentsDevice for wireless communication Left Side Components Left Side ComponentsLeft Side Components Bottom Components Bottom ComponentsBottom Components Rear Panel Components Rear Panel ComponentsAdditional Standard Components Additional Standard Components Additional Standard Components Look at the Computer Keyboard and Pointing Devices Using the TouchPad TouchPad ModelsUsing the Pointing Stick Pointing Stick Models Fn Key Using Hotkeys and Shortcut KeysHotkeys Shortcut Keys Hotkey and Shortcut Key ProceduresAdjust System Volume Fn+F5 Set Power Conservation Level Fn+F7 Stretch Text Fn+T Enabling the Numeric Keypad Using the Embedded Numeric KeypadEnabling the Numeric Keypad at Startup Disabling the Numeric KeypadConverting the Numeric Keypad Keys to Standard Keys Using the Easy Access Buttons Keyboard and Pointing Devices Charging Battery Packs Battery PacksUsing a New Battery Pack Replacing the Primary Battery Pack Replacing a Battery PackBattery Packs Hardware Guide Replacing an Optional External Battery Pack Hardware Guide Battery Packs Hardware Guide Recycling a Used Battery Pack Storing a Battery PackRemoving a Hard Drive DrivesCaring for Drives Drives Hardware Guide Drives Hardware Guide Inserting a Hard Drive Changing the Startup Sequence with MultiBootEnabling Bootable Media and Devices for MultiBoot Using the Default Search Sequence Hardware Guide Planning Changes to the Startup Sequence Selecting a MultiBoot UtilitySetting a Continuing Startup Sequence Changing the Startup Sequence Computer SetupResponding to the Express Boot Menu Setting the MultiBoot Express PromptChanging the Startup Sequence Compaq Computer Security Drives Audio and Video Using Audio FeaturesAudio Components Connecting a Stereo Speaker/HeadphoneAdjusting Volume Connecting a MicrophoneUsing Video Features Connecting a Device to the Composite Video-Out Jack Changing the Video Mode External Device Connections Connecting an External MonitorConnecting a Serial Printer Connecting a Video DeviceConnecting Infrared Equipment Connecting a Parallel PrinterInfrared Connection Guidelines Enabling the Infrared Port Infrared Configuration GuidelinesAttaching a Mobile Expansion Unit Connecting USB EquipmentConnecting a Docking Base Connecting to Wireless Devices Connecting a Modem or NICExternal Device Connections Before Removing or Installing Components Computer Upgrades and Add-onsUpgrading Memory Removing and Inserting a Memory Expansion Board Computer Upgrades and Add-ons Hardware Guide Installing a Memory Expansion Board on the System Board Hardware Guide Computer Upgrades and Add-ons Hardware Guide Removing a Memory Expansion Board Upgrading or Adding a Modem or NIC Computer Upgrades and Add-ons Hardware Guide Computer Upgrades and Add-ons Hardware Guide Configuring a PC Card Adding and Using PC CardsInserting a PC Card Removing a PC Card Conserving Energy Docking Bases Installing Additional Device DriversAttaching the Mobile Expansion Unit Connecting the External Diskette Drive Using an External Diskette DriveUpgrading the Hard Drive Adding a Second Battery PackAdding Wireless Devices Disconnecting the External Diskette DriveAgency Series Numbers SpecificationsRegulatory Agency Series Numbers Operating Environment Computer DimensionsPort and COM Port Settings Rated Power InputCOM2 Modem SpecificationsIndex Index Hardware Guide USB