HP n410c manual Connecting an Optional External MultiBay

Page 65

External Device Connections

Connecting an Optional External MultiBay

1.Connect the single-connector end of the External Multibay Powered USB Cable 1 to the external multibay connector. Be sure the pin on the connector is inserted completely in the pin slot.

2.Connect the USB connector on the other end of the cable 2 to the USB connector on the External MultiBay.

3.Connect the 5-volt plug 3 to the power connector on the External MultiBay.

Hardware Guide

7–9

Image 65

Contents Hardware Guide Page Contents Drives Specifications Index Setting Up the Hardware Hardware and Software SetupHardware and Software Setup Hardware Guide Hardware and Software Setup Hardware Guide Read the following guidelines, then set up the software Setting Up the SoftwareAfter Software Setup Hardware and Software Setup Front Panel Components Look at the NotebookFront Panel Components Top Components Top ComponentsTop Components Top Components Right Side Components Right Side ComponentsRight Side Components Left Side Components Left Side ComponentsBottom Components Bottom ComponentsBottom Components Rear Components Rear Panel ComponentsAdditional Standard Components Additional Standard Components Safety & Comfort GuideComponentFunction Pointing Devices and Keyboard Using the TouchPadFn Key Using Hotkeys and Shortcut KeysHotkeys Shortcut Keys Hotkey and Shortcut Key ProceduresAdjust System Volume Fn+F5 Adjust Screen Brightness Fn+F10 Disabling the Numeric Keypad Using the Embedded Numeric KeypadEnabling the Numeric Keypad Enabling the Numeric Keypad at Startup Converting the Numeric Keypad Keys to Standard KeysButton Name Default Assignment Using the Easy Access ButtonsUsing Default Settings Pointing Devices and Keyboard Charging Battery Packs Battery PacksBattery Packs Replacing a Battery Pack Using a New Battery PackReplacing the Primary Battery Pack Hardware Guide Replacing an Optional External Battery Pack Hardware Guide Battery Packs Storing a Battery Pack Removing a Hard Drive DrivesCaring for Drives Drives Hardware Guide Drives Hardware Guide Inserting a Hard Drive Audio and Video Using Audio FeaturesAudio Components Adjusting Volume Connecting a Stereo Speaker or HeadphoneConnecting a Microphone Keyboard Fn+F5 hotkeys Using Video FeaturesChanging the Video Mode Connecting a Device to the Composite Video-Out JackExternal Device Connections Connecting a Video Device Connecting an External MonitorInfrared Connection Guidelines Connecting Infrared EquipmentEnabling the Infrared Port Infrared Configuration GuidelinesConnecting an Optional Mobile Expansion Unit Connecting USB Equipment Using the RJ-11 Cable Connecting a ModemUsing a Country-Specific Modem Cable Adapter Connecting a Network Cable Connecting an Optional External MultiBay Connecting an Optional Cable Lock Connecting to Wireless DevicesBefore Removing or Installing Components Upgrading Memory Inserting and Removing a Memory Expansion Board Hardware Guide Inserting a Memory Expansion Board on the System Board Hardware Guide Hardware Guide Removing a Memory Expansion Board Upgrading or Adding a Modem or NIC Hardware Guide Hardware Guide Hardware Guide Configuring a PC Card Adding and Using PC CardsInserting a PC Card Removing a PC Card Conserving Energy Installing Additional Device DriversUpgrading the Hard Drive Adding a Second Battery PackOperating Environment SpecificationsPort and COM Port Settings Rated Power InputInterfaces Modem SpecificationsIndex Documentation Library QuickRestoreDocumentation Library CD Hardware Guide 2-12 hardware setup 1-1 headphones, headset Index-4 Safety & Comfort Guide 2-12 screen brightness, Fn Index-6

Related manuals

Manual 36 pages 54.07 Kb