HP n410c manual Hardware and Software Setup

Page 7

Hardware and Software Setup

ÅWARNING: This is a Class B digital device, pursuant to Part 15 of the FCC Rules. For more Class B information, refer to the Regulatory and Safety Notices Guide on the Documentation Library CD, included with the notebook.

To reduce the risk of personal injury, electric shock, fire, or damage to the equipment:

Do not disable the power cord grounding plug. The plug is an important safety feature.

Plug the equipment into a grounded (earthed) electrical outlet that is easily accessible at all times.

Disconnect power from the equipment by unplugging the power cord from the electrical outlet.

Do not set up the notebook while it is docked in an optional Mobile Expansion Unit.

2.Place the notebook on a flat surface near an electrical outlet.

1–2

Hardware Guide

Image 7
Contents Hardware Guide Page Contents Drives Specifications Index Setting Up the Hardware Hardware and Software SetupHardware and Software Setup Hardware Guide Hardware and Software Setup Hardware Guide Read the following guidelines, then set up the software Setting Up the SoftwareAfter Software Setup Hardware and Software Setup Front Panel Components Look at the NotebookFront Panel Components Top Components Top ComponentsTop Components Top Components Right Side Components Right Side ComponentsRight Side Components Left Side Components Left Side ComponentsBottom Components Bottom ComponentsBottom Components Rear Components Rear Panel ComponentsAdditional Standard Components Additional Standard Components Safety & Comfort GuideComponentFunction Pointing Devices and Keyboard Using the TouchPadFn Key Using Hotkeys and Shortcut KeysHotkeys Shortcut Keys Hotkey and Shortcut Key ProceduresAdjust System Volume Fn+F5 Adjust Screen Brightness Fn+F10 Enabling the Numeric Keypad Using the Embedded Numeric KeypadDisabling the Numeric Keypad Enabling the Numeric Keypad at Startup Converting the Numeric Keypad Keys to Standard KeysUsing Default Settings Using the Easy Access ButtonsButton Name Default Assignment Pointing Devices and Keyboard Charging Battery Packs Battery PacksBattery Packs Replacing a Battery Pack Using a New Battery PackReplacing the Primary Battery Pack Hardware Guide Replacing an Optional External Battery Pack Hardware Guide Battery Packs Storing a Battery Pack Caring for Drives DrivesRemoving a Hard Drive Drives Hardware Guide Drives Hardware Guide Inserting a Hard Drive Audio and Video Using Audio FeaturesAudio Components Connecting a Microphone Connecting a Stereo Speaker or HeadphoneAdjusting Volume Keyboard Fn+F5 hotkeys Using Video FeaturesChanging the Video Mode Connecting a Device to the Composite Video-Out JackExternal Device Connections Connecting a Video Device Connecting an External MonitorInfrared Connection Guidelines Connecting Infrared EquipmentEnabling the Infrared Port Infrared Configuration GuidelinesConnecting an Optional Mobile Expansion Unit Connecting USB EquipmentUsing the RJ-11 Cable Connecting a ModemUsing a Country-Specific Modem Cable Adapter Connecting a Network Cable Connecting an Optional External MultiBay Connecting an Optional Cable Lock Connecting to Wireless DevicesBefore Removing or Installing Components Upgrading Memory Inserting and Removing a Memory Expansion Board Hardware Guide Inserting a Memory Expansion Board on the System Board Hardware Guide Hardware Guide Removing a Memory Expansion Board Upgrading or Adding a Modem or NIC Hardware Guide Hardware Guide Hardware Guide Configuring a PC Card Adding and Using PC CardsInserting a PC Card Removing a PC Card Conserving Energy Installing Additional Device DriversUpgrading the Hard Drive Adding a Second Battery PackOperating Environment SpecificationsPort and COM Port Settings Rated Power InputInterfaces Modem SpecificationsIndex Documentation Library QuickRestoreDocumentation Library CD Hardware Guide 2-12 hardware setup 1-1 headphones, headset Index-4 Safety & Comfort Guide 2-12 screen brightness, Fn Index-6
Related manuals
Manual 36 pages 54.07 Kb