Setting up print spools on a cluster

http://www.microsoft.com/technet/prodtechnol/windowsserver200

3/technologies/fileprint/default.mspx

The link for “Checklist: Setting up a Printer” is particularly useful, and is also available via the online Windows Storage Server 2003 help by clicking Start > Help and Support, and then searching on “Checklist: Setting up a Printer.”

The following Microsoft Q article provides step-by-step instructions for setting up print spools on a cluster:

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q197046

Setting up an AppleTalk share

The following information is an addendum to the chapter, “Folder, Printer, and Share Management,” in the NAS Administration Guide.

AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have been installed on the NAS server.

Note: AppleTalk shares should not be created on clustered resources as data loss can occur due to local memory use.

Installing the AppleTalk Protocol

To install the AppleTalk Protocol:

1.From the desktop of the NAS server, click Start, navigate to Settings-Network Connections. Right-click Local Area Connection, and then click Properties.

2.Click Install. The Select Network Component Type dialog box is displayed.

Figure 1 is an example of the Select Network Component Type dialog box.

18	NAS Service Release 2 Quick Start Guide