Installing the Service Release on a cluster

The NAS Desktop can be accessed via a directly connected keyboard, mouse, and monitor, through Remote Desktop, or by using an Integrated Lights-Out port.

Note: If the CD does not automatically start, navigate to the drive where the CD is located and double-click setup.exe.

Note: Complete installation of the Service Release requires a reboot of the NAS device.

Installing the Service Release on a cluster

If installing the Service Release on a cluster, follow these instructions.

To install updates on a cluster:

1.Migrate all cluster resources to the node that is not being updated.

2.Run the Service Release 2 CD on the node from which the cluster resources were moved.

3.Restart the updated cluster node after the installation completes.

4.Migrate all cluster resources to the node of the cluster that was just upgraded.

5.Run the Service Release 2 CD on the node that has not yet been upgraded.

6.Restart the updated cluster node after the installation completes.

8	NAS Service Release 2 Quick Start Guide