HP Q6275A manual Use Advanced Setup

Page 10

Use Advanced Setup

The Advanced Setup screen allows you to discover your IP and Mac addresses and, if necessary for your network, manually change the IP address.

1Go to Start --> All Programs --> HP USB Network Print Adapter--> Advanced Setup The IP and MAC addresses of all network print adapters on your network will display.

2Select the adapter and click Next.

The IP Address Setting screen will display.

3Choose one of the following.

a.Select Obtain IP Address automatically if you have a DHCP server on your LAN

b.Click Next.

OR

a.If you do not have a DHCP server on your LAN, you must select Use the following IP Address.

b.Either accept the suggested IP address or enter a new one.

The IP Subnet Mask and Default Gateway must match your LAN and will be filled in for you.

c.Click Next.

3.Confirm your IP settings and click Apply.

• Click Back to go to the previous screen and change the IP address.

• Click Cancel to exit without making any changes.

10 Using the USB Network Print Adapter

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HP USB Network Print Adapter Copyright 2007 Hewlett-Packard Development Company, L.P Contents Contents Contents of the package WelcomeLights and ports of the print adapter Install the printer software and connect to the printer Basic setupInstall the Network Print Adapter software Connect the printInstall the printer software Using the USB Network Print Adapter Use the Connection ManagerUse Advanced Setup Troubleshooting Cannot detect Network Print Adapter during installationPrinter software is very old or not completely installed Technical information SpecificationsEnvironmental product stewardship program Limited warranty statement FCC statement European Union Regulatory Notice Declaration of Conformity Declaration of ConformityTechnical information
Top Page Image Contents