HP Q6275A manual Install the printer software

Page 8

Install the printer software

Leave your printer attached to the USB Network Printer Adapter.

1.Insert the printer software CD or start the downloaded driver installation.

2.When the software asks you to plug in the USB cable, do the following:

a.Right-click the Connection Manager icon in the system tray (lower-right corner of your screen).

b.Select Connect.

After a few moments, the icon will change to show a successful connection.

Connect to the printer using Connection Manager

If you already have the printer software installed on this computer follow these instructions.

1.Right-click the Connection Manager icon in the system tray (lower-right corner of your screen).

2.Click Connect.

After a few moments, the icon will change to show a successful connection.

8 Basic setup

Image 8

Contents HP USB Network Print Adapter Copyright 2007 Hewlett-Packard Development Company, L.P Contents Contents Contents of the package WelcomeLights and ports of the print adapter Basic setup Install the Network Print Adapter softwareInstall the printer software and connect to the printer Connect the printInstall the printer software Using the USB Network Print Adapter Use the Connection ManagerUse Advanced Setup Troubleshooting Cannot detect Network Print Adapter during installationPrinter software is very old or not completely installed Environmental product stewardship program SpecificationsTechnical information Limited warranty statement FCC statement European Union Regulatory Notice Declaration of Conformity Declaration of ConformityTechnical information