QuickSpecs
HP ProLiant DL585
Technical Specifications
System Unit Rack | Chassis Footprint | 6.94 x 19 x 26.5 in (17.6 x 48.3 x 67.3 cm) | |||
|
| (HxWxD) |
|
|
|
|
| Weight | 66 lb (29.9 kg) |
|
|
|
| No hard drives installed, |
|
|
|
|
| one power supply |
|
|
|
|
| Input Requirements | Rated Input Voltage | 100 to 120 VAC/200 to 240 VAC | |
|
|
| Rated Input Frequency | 50 to 60 Hz | |
|
|
| Input Power | 1135W @ 110 VAC/1125W @ 220 VAC | |
|
|
| Rated Input Current | 12A (100 VAC), 9.8A (120 VAC), 4.9A (220 | |
|
|
|
| VAC) | |
|
| Max BTU Rating | 4000 BTU |
|
|
|
| Power Specifications | To review typical system power ratings use the Active Answers Power | ||
|
|
| Calculator which is available via the online tool located at URL: | ||
|
|
| http://h30099.www3.hp.com/configurator/powercalcs.asp. | ||
|
|
| To drill down to calculators: |
|
|
|
|
| Click on: "ProLiant Servers" | ||
|
|
| Click on the Server of interest. Example: DL585 | ||
|
|
| Click on: "Power Calculator" link (You may need to scroll down to see | ||
|
|
| it.) |
|
|
|
| Power Supply Output | Rated | 800W/800W (lowline/highline) | |
|
| Power (per power supply) | Maximum Peak Power | 800W/800W (lowline/highline) | |
|
| Temperature Range | Operating | 50° to 95° F (10° to 35° C) | |
|
|
| |||
|
|
| Shipping | ||
|
| Relative Humidity | Operating | 10% to 70% | |
|
| 5% to 95% | |||
|
|
| |||
|
| Maximum Wet Bulb | 101.7° F (38.7° C) |
|
|
|
| Temperature |
|
|
|
|
| Acoustic Noise | NOTE: Listed are the declared | ||
|
|
| declared average bystander position sound pressure levels LpAm when | ||
|
|
| operating in a 23° C ambient environment. Noise emissions were measured | ||
|
|
| in accordance with ECMA 74 and declared in accordance with ECMA 109. | ||
|
|
| Idle (Fixed Disk Drives |
|
|
|
|
| Spinning) |
|
|
|
|
| L WAd (BELS) | 7.3 |
|
|
|
| L pAm (dBA) | 55 |
|
|
|
| Operating Minimum |
|
|
|
|
| (Random Seeks to Fixed |
|
|
|
|
| Disks) |
|
|
|
|
| L WAd (BELS) | 7.3 |
|
|
|
| L pAm (dBA) | 55 |
|
|
|
| NOTE: These values apply to 4U rack configuration with the Health Driver | ||
|
|
| Fan Control active. Configuration tested included 2 AMD Opteron 2.2 GHz | ||
|
|
| processors, 1 15 krpm hard drive, 2 power supplies, 4 memory/IO fans and | ||
|
|
| 4 CPU fans. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DA - 11902 Worldwide — Version 29 — May 5, 2005 | Page 40 |