HP DL585 Drives Supported, Battery-Backed Write, Cache RAID Support, Online Configuration

QuickSpecs

HP ProLiant DL585

Technical Specifications

NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports: SCSI Peak Data

Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels is 2.

	Drives Supported	2
	(maximum)
	NOTE: Maximum is the total number of internal drives on each specific ProLiant server.
	Cache	64 MB Read and/or Write Cache
	Battery-Backed Write	Yes, with installation of Battery-Backed Write Cache Enabler, up to 64MB
	Cache
	RAID Support	0, 1, 1+0, 5
	Logical Drives (maximum)	Maximum = total number of drives
	Online Configuration	Yes
	Online Capacity	Yes
	Expansion
	Logical Drive Capacity	Yes
	Extension
	Online Stripe Size	Yes
	Migration
	Online RAID Level	Yes
	Migration
	Online Spare Support	Yes
	Automatic Data Recovery	Yes
	Drive Roaming	Yes
	Redundant Controllers	No
Dual Port NC7782	Network Interface	10/100/1000-T
	Compatibility	IEEE 802.3 10Base-T
		IEEE 802.3ab 1000Base-T
		IEEE 802.3u 100Base-TX
	Data Transfer Method	64-bit/133MHz PCI-X
	Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-Duplex)	100 Mb/s
		100Base-TX (Full-Duplex)	200 Mb/s
		1000Base-TX (Half and	2000 Mb/s
		Full-Duplex)
	Connector	RJ-45
	Cable Support	10Base-T	Category 3, 4 or 5 UTP up to 328 ft (100 m)
		10/100/1000Base-T	Category 5 UTP (2 pair); up to 328 ft (100 m)

DA - 11902 Worldwide — Version 29 — May 5, 2005 Page 44