HP Modem and Local Area Network manual Connecting to a local area network

Page 13

2 Connecting to a local area network

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (not included). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.

To connect the network cable:

1.Plug the network cable into the network jack (1) on the computer.

2.Plug the other end of the cable into a network wall jack (2).

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem or telephone cable into the RJ-45 (network) jack.

Image 13

Contents Modem and Local Area Network Copyright 2007 Hewlett-Packard Development Company, L.P Product notice Iv Product notice Table of contents Page Using the modem select models only Connecting a modem cable Connecting a country-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Check the telephone line type Solving travel connection problemsConnecting to a local area network Cable Index