HP Modem and Local Area Network manual Using the modem select models only

Page 7

1 Using the modem (select models only)

The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (included with select models only). In some countries, a country-specific modem cable adapter is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.

WARNING! Connecting the internal analog modem to a digital line can permanently damage the modem. Immediately disconnect the modem cable if you accidentally connect it to a digital line.

If the modem cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end (2) of the cable toward the computer.

1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Modem and Local Area Network Copyright 2007 Hewlett-Packard Development Company, L.P Product notice Iv Product notice Table of contents Page Using the modem select models only Connecting a modem cable Connecting a country-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Check the telephone line type Solving travel connection problemsConnecting to a local area network Cable Index
Top Page Image Contents