HP I Express Gigabit Server Adapter NC110T manual Models, Overview, Kit Contents

QuickSpecs

HP NC110T PCI Express Gigabit Server Adapter

Overview

The HP NC110T is a cost-effective Gigabit Ethernet server adapter that features single-port, copper, single lane (x1) PCI Express capability, with 48KB onboard memory that provides 10/100/1000T auto-negotiated speed and duplex. Designed with ProLiant server needs in mind, it offers these server features: Cold boot Wake-on-LAN (WOL), PXE, Jumbo Frames (9K), Large Send Offload (LSO), TCP Checksum Offload, and includes brackets for both half (low profile) and full height server slots so that customers have maximum flexibility using this server adapter with their ProLiant server.

The NC110T is based on the Intel 82572GI controller and supports these IEEE standards: 802.3, 802.3u, 802.3ad, and 802.3ab, 802.1x, 802.1Q and 802.1p. Validated by HP so that it meets the highest ProLiant standards and provides a seamless, network solution that is integrated with HP SmartStart, Insight Manager, networking software, firmware, and agents. NIC teaming drivers are available for all major operating systems along with teaming utilities, multiple VLAN tagging, and a configuration GUI.

Models

HP NC110T PCI Express Gigabit Server Adapter		434905-B21
Kit Contents	The option kit contents consist of the following items:

HP NC110T PCI Express Gigabit Server Adapter PCA ships with a standard height bracket attached to it. (The low profile bracket is included in the clamshell that the PCA ships in.) Product Warranty statement and the Quick Install Card (QIC).

CD containing Drivers, User Guide, Installation and Diagnostic Utilities, and User Guide (English only).

DA - 12664 Canada — Version 1 — February 12, 2007 Page 1