HP Integrated Lights-Out manual Application Launch Using Insight Manager

244 User Guide Integrated Lights-Out

14.Click Overview on the left side of the screen after the verification has taken place. The initial page for devices opens.

Application Launch Using Insight Manager 7

The Application Launch combines the RIBCL, the Lights-Out Configuration Utility, and the query definition to manage the Group Administration of iLO management processors.

To create an Application Launch task:

1.Click Device in the navigation bar on the top left side of the screen.

2.Click Tasks to open the Tasks screen.

3.Click New Control Task. A drop-down menu is displayed.

4.Click Application Launch from the dropdown menu to open the Create/Edit Task screen.

5.Enter the full path and name for the Lights-Out Configuration Utility in the area provided. If the CPQLOCFG.EXE file is in the root directory of the C:\ drive, then the path is C:\cpqlocfg.exe.

6.Enter the parameters in the area provided. Insight Manager 7 requires the following parameters for the Lights-Out Configuration Utility:

-F is the full path of the RIBCL file name. -V is the verbose message (optional).

If the RIBCL file is in the root directory of on the C:\ drive, then the parameters are:

-F C:\MANAGEUSERS.xml -V

NOTE: The -L parameter cannot designate an output log file. A default log file named with the DNS name or the IP address is created in the same directory where CPQLOCFG is launched.

7.Click Next. A screen displays the options for naming the task, defining the query association, and setting a schedule for the task.

8.Enter a task name in the Enter a name for this task field.

9.Select the query that had been created earlier, for example "Mgmt Processors."