Thermo Products OH6FA072DV4R, OH6FA072D48B Side Wall Venting Application Order Information

Page 5

All installations and services must be performed by qualified service personnel.

A. VENTING:

NOTE: On the OH6FA072D*** it is possible to rotate the flue elbow (which is factory installed for vertical discharge) 90° counterclockwise from the vertical position to adapt to various venting systems.

cCAUTION MUST BE TAKEN NOT TO EXCEED 90° ROTATION (OF THE FLUE ELBOW) COUNTERCLOCKWISE OR RIGHT FROM THE VERTICAL POSITION.

ROTATION OF FRONT FLUE ELBOW

When an installation requires that the flue exit out the left hand side casing on a front flue unit, remove screw securing the 90 deg. elbow and rotate it 90° counterclockwise. Then, remove knock-out in side casing and extend vent through the opening.

A trim collar may be ordered from Thermo Products to hide the gap around the flue pipe. This trim collar, however, is not required for operation. Trim collar/gasket part numbers(s) 14121 / 330073.

NOTE: ROTATION OF FLUE PIPE IS ONLY ALLOWED FOR LEFT HAND SIDE VENTING APPLICATIONS.

The OH6FA072D*** may be vented through a standard correctly sized chimney.

The OH6FA072D*** may also be horizontally vented through a side wall. Thermo Products has available the Field model FDVS-45/FVOP-415 side wall vent kit for such applications. When installing the FDVS-45/FVOP-415 side wall vent kit, outside combustion air must also be applied to the burner. The following table identifies application order information.

SIDE WALL VENTING APPLICATION ORDER INFORMATION

 

FIELD VENT

SIDE WALL VENT

COMBUSTION AIR

 

TERMINATION KIT

ACCESSORIES KIT

INTAKE HOOD KIT

 

(15’ application MAX)

(BURNER SPECIFIC)

(FOR COMBUSTION AIR

 

THERMO PRODUCTS

THERMO PRODUCTS

APPLICATIONS ONLY)

 

THERMO PRODUCTS

BURNER

PART NUMBER

PART NUMBER

PART NUMBER

Beckett AFG

AOPS8393

AOPS8394

AOPS8396

 

 

 

 

Riello BF3

AOPS8393

AOPS8395

AOPS8396

 

 

 

 

The Field vent kit is set up with 4 inch diameter vent pipe with concentric through-the-wall vent termination/inlet air vent hood. The combustion air inlet pipe diameter is also 4 inch diameter. For Riello, the combustion air inlet pipe will be reduced to 3 inch diameter with the Riello side wall vent kit. For Beckett, the combustion air inlet pipe will be reduced to 2” diameter with the Beckett side wall vent kit.

The side wall vent may be installed either through the upper knock-out on the left side casing of the unit or vertically out the top opening of the vestibule.

The combustion air inlet can be installed through the either the lower left side casing knock-out or the lower right side casing knock-out.

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OH6FA072DV4R OH6FA072DV4BSafety Section Table of Contents Section Beginning Combustible Material II. General Instructions Read Before Start of InstallationNON-COMBUSTIBLE Material From Rear FLUE/VENTVenting Rotation of Front Flue Elbow Side Wall Venting Application Order InformationFilters Mounted External to Furnace Draft RegulatorsDuct WORK/AIR Conditioning Limit location for OH6FA072D Limit Position and LocationBurner insertion illustration Top view Burner InstallationOH6FA072D**B Burner Specifications and ApplicationsClean-out plug removal Heat Exchanger Cleaning InstructionsStarting the Burner III. Users Information SectionInspection Areas Location of the air filter on the typical highboy furnace Filter Cleaning and LocationCustomer APPENDIX-A Replacement Parts List APPENDIX-B Wiring Diagrams
Related manuals
Manual 78 pages 920 b

OH6FA072D48R, OH6FA072DV4B, OH6FA072DV4R, OH6FA072D48B specifications

Thermo Products has established a reputation for delivering high-quality heating solutions tailored for various applications. Among their standout offerings are the OH8FA119DV5R, OH8FA119D60R, OH6FA072D48B, OH6FA072D48N, and OH6FA072DV4N models. These units are engineered with precision and incorporate advanced technologies to deliver reliable performance in residential and commercial settings.

One of the main features of these models is their energy efficiency. They utilize modern heat exchanger designs, which allow for maximum heat transfer while minimizing energy consumption. This not only helps in reducing utility bills but also supports sustainable practices by lowering the carbon footprint. Many systems are also equipped with variable-speed motors, providing precise airflow control, which enhances comfort while operating quietly.

In addition to their energy efficiency, these units incorporate smart technology that allows for seamless integration into home automation systems. This feature enables users to monitor and control their heating systems remotely through mobile apps, making it convenient to adjust settings for optimal comfort. The smart thermostats associated with these models often feature learning capabilities, which adapt to users' habits to optimize heating schedules further.

Durability is another standout characteristic of the OH8FA and OH6FA series. Built with robust materials, these heaters are designed to withstand the rigors of daily use. Many units come with extended warranties, reflecting the manufacturer's confidence in their longevity. Furthermore, corrosion-resistant components ensure that the units maintain their performance over time, even in challenging environments.

Safety is also a key consideration in these products. Equipped with multiple safety features, including overheat protection and flame sensors, users can rest assured their heating systems operate without risk. Additionally, these models often include advanced diagnostics, making troubleshooting easier and enhancing user experience.

In summary, Thermo Products' OH8FA119DV5R, OH8FA119D60R, OH6FA072D48B, OH6FA072D48N, and OH6FA072DV4N represent a blend of efficiency, technology, durability, and safety in heating solutions. Whether for a cozy home or a large commercial space, these models offer versatile options to meet diverse heating needs while prioritizing energy conservation and user convenience. As the demand for efficient heating continues to rise, Thermo Products remains a leader in providing innovative solutions that cater to modern heating requirements.
Top Page Image Contents