QuickSpecs
HP xw9300 Workstation
Technical Specifications - Optical Devices
48X | Form Factor | ||
| Mounting Orientation | Horizontal or vertical |
|
| Interface | ATAPI/EIDE |
|
| Dimensions (HxWxD) | 1.63 x 5.83 x 7.27 in (4.13 x 14.6 x 18.5 cm) | |
| Weight | 1.76 lb (0.8 kg) |
|
| Data Transfer Rates - | Digital audio extraction (minimum) – 1,200 KB/s (8X) | |
| Read | CD read – up to 7,200 KB/s (48X) | |
| Media and Formats - | CD Media | stamped, |
| Read | CD Capacities | 180 MB (mode 2, 8 cm); 540 MB (mode 1, 12 |
|
| ||
|
|
| cm); 650 MB (mode 2, 12 cm); 700 MB (Mode |
|
|
| 2, 12 cm, |
|
| CD Formats | |
|
|
| (Mode 2, Form 1 and 2), Photo CD (Single |
|
|
| and |
|
|
| Data combined), |
|
|
| and |
|
|
| CD |
| Access Times | < 125 ms | |
| (typical reads, including | Full Stroke CD | < 210 ms |
| settling) | < 7 s (single session), < 30 s | |
|
| ||
|
| Stop Time (typical) | < 4 s |
|
| Write Buffer Size | 128 KB (minimum) |
|
| Data Transfer Modes | PIO Mode 4 (16.6 MB/s); |
|
|
| mode 2 (16.6 MB/s); UltraDMA Mode 0 (16.7 |
|
|
| MB/s); UltraDMA Mode 2 (33.3 MB/s) |
| Power | Source | |
|
| DC Power Requirement 5 VDC ± 5% - 100 mV ripple | |
|
|
| 12 VDC ± 5% - 200 mV ripple |
|
| DC Current | 5 VDC - <1000 mA typical, |
|
|
| < 1600 mA maximum |
|
|
| 12 VDC - < 600 mA typical, |
|
|
| <1400 mA maximum |
|
| Total Drive Power | < 2.5 Watt |
|
| (standby mode) |
|
| Audio Output | 0.7 VRMS | |
|
| 74 dB | |
|
| Channel Separation | 65 dB |
| Configuration Jumper | Master, slave, and cable select modes | |
| Block |
|
|
| Operating Conditions | Temperature | 41° to 122° F (5° to 50° C) |
| (all conditions non- | Humidity | 10% to 80% |
| condensing) | ||
|
|
|
DA - 12186 Worldwide — Version 33 — May 25, 2007 | Page 49 |