QuickSpecs
HP xw9300 Workstation
Technical Specifications - Optical Devices
| Power | Source | |
|
| DC Power Requirement | 5 VDC ± 5% – 100 mV ripple |
|
|
| 12 VDC ± 5% – 200 mV ripple |
|
| DC Current | 5 VDC – <800 mA typical, |
|
|
| < 1000 mA maximum |
|
|
| 12 VDC – < 870 mA typical, |
|
|
| <1800 mA maximum |
| Audio Output | 0.7 VRMS | |
|
| 85 dB | |
|
| Channel Separation | 65 dB |
| Configuration Jumper | Master, slave, and cable select modes | |
| Block |
|
|
| Data Interface | ||
| Connector |
|
|
| Operating | Temperature (operating) 41° to 122° F (5° to 50° C) | |
| Environmental | Relative Humidity | 10% to 85% |
| (all conditions non- | ||
| (operating) |
| |
| condensing) |
| |
| Maximum Wet Bulb | 86° F (30° C) | |
|
| ||
|
| Temperature (operating) |
|
| Certifications, | MMC II support, | |
| Approvals | ACA AS/NZS 3548 class B, CNS 13438, C.I.S.P.R. Pub 22, TUV or | |
|
| VDE EN60950, EN 55022, EN55024, EMKO EN60950, EN | |
|
| 60950, CSA C22.2 | |
|
| C.I.S.P.R. Pub 22 Class B, DHHS/FDA, ANSI | |
| Operating Systems | Microsoft Windows 2000, Windows XP Professional | |
| Supported |
|
|
| Kit Contents | 16X/48X | |
|
| software, audio cable, and installation guide. | |
|
|
| |
HP 48X | Form Factor | ||
| Mounting Orientation | Horizontal or vertical |
|
| Interface | ATAPI/EIDE |
|
| Dimensions (HxWxD) | 1.63 x 5.75 x 7.27 [max] in (4.13 x 14.6 x 18.5 [max] cm) (external, | |
|
| excluding bezel) |
|
| Weight (max) | 2.0 lb (0.9 kg) |
|
DA - 12186 Worldwide — Version 33 — May 25, 2007 | Page 51 |