Thermo Products MO-425 Proper Chimney Bottom Level, Tight Joints, No Interconnected Chimney Flues

Page 7

All installations and services must be performed by qualified service personnel.

5. PROPER CHIMNEY BOTTOM LEVEL:

In cases where the chimney extends to the basement floor, the draft can usually be improved by filling the base of the chimney with sand to within 12 inches of the vent connector pipe after relocating the clean-out door. (See Fig. 5).

Fig. 5: Suggested method to improve chimney draft.

6. TIGHT JOINTS:

All joints of the chimney must be tightly sealed. The inside of the chimney should be free of any obstructions, such as loose brick, broken pieces of tile, or corroded metal.

7. TIGHT CLEAN-OUT DOORS AND CONNECTIONS:

All chimney clean-out doors and flue connections must fit tightly so they will seal to avoid air leaks.

8. NO INTERCONNECTED CHIMNEY FLUES:

If chimney flues are divided or there are multiple flues within one chimney, make sure there are no openings in the partition separating the divided or individual flues.

B. FLUE PIPE CLEARANCES, SIZING AND TYPE:

The vent connector pipe must not pass through a combustible wall or partition unless adequate protection is provided at the passageway. An acceptable passageway could be either an approved, ventilated metal thimble which is at least 12 inches larger in diameter than the vent connector pipe, or brick work which is at least 8 inches thick constructed into the wall and surrounding the vent connector pipe. (See Fig. 6).

Fig. 6: Suggested method to accommodate vent connector passage through a wall composed of a combustible material.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OIL Furnace Table of Contents Section Beginning Combustible Material General Instructions Read Before Start of InstallationNON-COMBUSTIBLE Material Proper Chimney Size II. InstallationMAKE-UP AIR ChimneyPrevention of Chimney Condensing Proper Chimney Height Proper Vent Connector PIPE/CHIMNEY ConnectionNo Interconnected Chimney Flues Tight CLEAN-OUT Doors and ConnectionsProper Chimney Bottom Level Tight JointsReduction of Clearances with Specified Forms of Protection Duct Work Supply air duct sizing Example OIL Tank & Piping WiringOIL Filter Page Initial Burner Operation III. Dealer Maintenance Yes Also Perform CAD Cell Check OUT Procedurerefer to Index YES Is the Nozzle PLUGGING? Replace Burner Effects of Pressure on Nozzle Flow Rate On START-UP CAD Cell Checkout ProcedureCleaning or Replacing Flue Pipes On SHUT-DOWNFollow initial burner operation procedures from section G

MO-425 specifications

The Thermo Products MO-425 is an advanced heating solution designed for both residential and commercial applications. Known for its efficiency and innovative features, the MO-425 stands out in the market for those seeking reliable performance in temperature control.

One of the key characteristics of the MO-425 is its energy efficiency. It utilizes cutting-edge technology that minimizes energy consumption while optimizing heating output. The unit is equipped with a high-efficiency motor that reduces electricity usage, making it an eco-friendly choice for consumers concerned about energy costs and environmental impact.

The MO-425 also boasts a robust construction designed for durability. Made from high-quality materials, the unit is built to withstand the rigors of frequent use while maintaining its performance over time. This reliability is complemented by an advanced heating element that provides consistent warmth, ensuring that users enjoy a comfortable environment regardless of weather conditions.

In terms of controls, the Thermo Products MO-425 features a user-friendly interface, allowing for easy adjustments to temperature settings. The digital thermostat enables precise temperature control, which not only enhances comfort but also contributes to energy savings. Additionally, the unit has programmable features, allowing users to set heating schedules according to their routines, further promoting efficiency.

Another notable feature of the MO-425 is its quiet operation. The design includes sound-dampening technology that reduces noise levels during operation, making it suitable for use in living spaces, offices, and other environments where peace and quiet are essential.

The MO-425 is also versatile, offering multiple installation options to accommodate various spaces. It can be mounted on walls or used as a portable unit, making it adaptable to different room layouts and heating needs. This flexibility ensures that users can find the ideal setup for maximizing warmth and comfort in their environments.

Additionally, the Thermo Products MO-425 is backed by excellent customer support. Users can rely on a robust warranty and access to assistance for any inquiries, ensuring a positive ownership experience.

Overall, the Thermo Products MO-425 is a top-tier heating solution that combines efficiency, durability, and user-friendly features. Whether for residential or commercial use, it addresses the critical needs of modern heat management, making it a valuable addition to any home or workspace.
Top Page Image Contents